Under Cabinet LED Lighting kit, 6 PCS LED Strip Lights with Remote Control Dimmer and Adapter, Dimmable for Kitchen Cabinet,Counter,Shelf,TV Back,Showcase 2700K Warm White, Bright, Timing
Flexible and neatly connectors
"U" style connector and extension connectors are flexible; 5PCS extension connectors, total length: 33.5 inch. these are convenient to connect, also keep the cabinet neatly and beautiful.
6 x LED light bar,
5 x straight connector, 5 X "U" style connector,
1 x UL Listed adaptor, 1 X dimmer, 1 X remote,
2 x cable holder, 8 X PINs.
Volt In.: AC 100-240V
Volt Out.: DC 12V, 2A
Power: 2W/PC, Total 13W
Lumen: 250lm/bar, 1500lm/kit
Beam Angle: 120 degree
CRI: >80, Colar temperature:2700K.
Length of Light Strip:0.5 meter/PC, Total 3 meter.
1.Before installing ,make sure the destination surface clean and dry.
The 1st control method
Control range: 40-60 ft
Signal can go through the obstacles( Cabinet, Door, Wall...).
After re-match, 1 remote can control many matched lights.
Remote can be perfect to adjust the brightness or setting a timing off this cabinet light kit.
The 2nd control method
Click the button to turn on/ off light.
When turn on the light, press the button to adjust the brightness,the brightness will go down, then up to MAX.
When turn off the light, press the button will go to “re-match”status. the light will flick. please refer to “re-match” function.
How to "re-match"?
After plug in the power, turn on the light bar(to make sure all the connection is right).turn off the light(just click the button on the dimmer, all the connection is still fine),
press (about 3 seconds)the button on the dimmer to go into the "match" status, then press the on/off button on the remote.
The dimmer is in "match" status when the strip is flick, the "re-match" is done when the strip changes to constant on. try to control the light bar with the matched remote.